Monarch Resin Floors completed a resin flooring installation within an automotive workshop in Mansfield. The existing tiled floor was heavily damaged and required complete removal before a new flooring system could be installed. The project included floor preparation, levelling, the installation of a 2mm Monargrip resin flooring system and new operational line markings.
The works were completed in two phases to minimise disruption and allow the workshop to remain operational throughout the project.
Written by: Monarch Resin Floors
Last Updated: August 2026
The existing tiles were removed to expose the concrete substrate beneath. Residual tile adhesive was then mechanically removed to provide a clean and suitable surface for the new flooring system. Once preparation was complete, the floor was primed before a pump floor was installed. This created a smooth and consistent base over which the resin flooring system could be applied.
A 2mm Monargrip system was then installed in a light grey finish across the workshop. The light grey resin provided a clean and consistent appearance while helping to improve brightness throughout the working environment.
The installation also included:
The line markings were installed using Monarcoat 700, a durable epoxy coating suitable for industrial floor marking applications.
The condition of the original tiled floor meant that several stages of preparation were required before the resin system could be installed. Removing the tiles and remaining adhesive was necessary to expose the concrete and provide a suitable foundation for the new flooring. The pump applied floor then helped correct irregularities within the substrate and create an even surface for the Monargrip system.
As the workshop needed to remain operational, the project was divided into two phases. This allowed separate sections of the floor to be prepared and coated while reducing disruption to the client’s day to day activities. Careful sequencing was also required around the testing pit, ramps and vehicle bays to ensure that the markings aligned with the operational layout of the workshop.
The completed installation transformed the heavily damaged tiled floor into a seamless and clearly organised workshop surface. The light grey Monargrip finish provides a clean and consistent appearance across the space. White bay markings clearly identify vehicle positions, while the yellow hazard chevrons improve visibility around the inspection pit.
Line marking around the testing pit and ramps further defines the operational areas of the workshop and supports an organised working layout. The result is a practical resin flooring installation designed around the daily requirements of a working automotive facility.
| Project Detail | Information |
|---|---|
| Location | Mansfield |
| Environment | Automotive workshop |
| Existing Floor | Heavily damaged tiled floor |
| Preparation | Tile removal and mechanical removal of residual adhesive |
| Levelling | Primed and pump applied |
| Resin System | 2mm Monargrip system |
| Floor Colour | Light grey |
| Line Marking Product | Monarcoat 700 |
| Markings Installed | White vehicle bays, yellow hazard chevrons and markings around the testing pit and ramps |
| Key Challenge | Completing the installation while the workshop remained operational |
| Programme | Completed in two phases to minimise disruption |
Resin flooring systems can provide a seamless and practical surface for automotive workshops, vehicle testing facilities, service centres and commercial garages. At Monarch Resin Floors, we provide complete flooring installations including tile and coating removal, mechanical floor preparation, levelling, resin flooring and operational line marking. Each system is specified around the condition of the existing substrate and the practical requirements of the facility. If you are reviewing the flooring within an automotive workshop or vehicle facility, our team can provide technical advice and arrange a site assessment.
Learn more about our automotive resin flooring systems and demarcation and line marking services. We would be happy to discuss your resin flooring project.
Call 01246 412 222, email sales@monarchresinfloors.co.uk or complete our contact form and a member of the team will get in touch.
We would love to speak with you about your resin flooring project.
Feel free to reach out using the below details or fill out the contact form and a member of our team will get in touch with you within 48 hours.
We never pass on any of your information to third parties and will only get in touch about the flooring project your enquiring about.
We never pass on any of your information to third parties and will only get in touch about the flooring project your enquiring about.