What is Monargrip?

Monargrip is an epoxy resin flooring system that presents excellent levels of slip resistance in the wettest of areas. Ideal for any areas where outstanding levels of slip resistance is required. Monargrip is based on a blend of epoxy resins and quartz aggregates, and is available in a wide range of colour choice and slip resistance grades.


Wide range of colours available

High levels of slip resistance

Recommended Uses

  • Food Factories
  • Factory Gangways
  • Brewery Flooring
  • Wet Rooms
  • Leisure Centres
  • Sports Facilities
  • Laundries


Monargrip + 2 (2mm² system)

Apply Monarcoat 720@4m²/kg to ensure good thickness on surface. Blind with quartz sand to full coverage with chosen quart (14-60’s mesh – depending on level of slip resistance required. Apply top coat of Monargrip @ 1.5kg/m² by squeegee and roller. Apply evenly to allow slip resistant aggregate to be exposed.

Monargrip + 4 (4mm system)

Apply Monarprime by brush and roller to fully seal floor. Apply Monarflow self-smoothing epoxy resin floor topping @2mm thickness by pin rake and trowel and whilst uncured cast in quart sand to full coverage (allow 3 kg/m²). Sweep off excess sand and apply Monargrip top coat by squeegee and roller @ 1.5 kg/m² to ensure even application.

Please consult technical department for advice on mesh size.

If you have any more questions in regards to this epoxy resin product or others which we install please use the contact form below or see our contact page for more reasons to get in touch.