About

Monarthane is a three part resin rich, heavy duty polyurethane floor screed designed to present a floor surface resistant to chemical attack and the hardest physical abrasion from vehicular movement.

Mixing

Monarthane is a three component product. Pre-mixing of the coloured resin and hardener for one minute prior to mixing in aggregate component until homogeneous mix obtained. A resin mixer such as Creteangle or Daines should be employed for best results. Apply mixed product by steel trowel to required levels and finish with roller for sealed, trowel-mark free results.

Application

All surfaces to be mechanically prepared, dry and dust free. Prime prior to application with Monarprime Epoxy Resin Primer. Primer should cure prior to application of Monarthane.

Recommended Uses

Areas subject to abrasion, heavy wading, chemical exposure and areas where a slip-resistant, seamless sealed profile is required.

Typical Areas of Use: Food processing areas, Laboratories, Engineering workshops, Breweries / Pub cellars, Chemical areas

Physical Properties

Compressive strength 58n/mm² Sup resistance (rapra 45 slider) Dry 70 Wet 60 For vertical applications or to form coved skirting, apply Monarthane ‘V’

IMG_8771