Polyurethane Resin Flooring


Monarthane is a three part resin rich, heavy duty polyurethane floor screed designed to present a floor surface resistant to chemical attack and the hardest physical abrasion from vehicular movement.


Monarthane is a three component product. Pre-mixing of the coloured resin and hardener for one minute prior to mixing in aggregate component until homogeneous mix obtained. A resin mixer such as Creteangle or Daines should be employed for best results. Apply mixed product by steel trowel to required levels and finish with roller for sealed, trowel-mark free results.


All surfaces to be mechanically prepared, dry and dust free. Prime prior to application with Monarprime Epoxy Resin Primer. Primer should cure prior to application of Monarthane.


Areas subject to abrasion, heavy wading, chemical exposure and areas where a slip-resistant, seamless sealed profile is required.

Typical Areas of Use: Food processing areas, Laboratories, Engineering workshops, Breweries / Pub cellars, Chemical areas

Physical Properties

Compressive strength 58n/mm² Sup resistance (rapra 45 slider) Dry 70 Wet 60 For vertical applications or to form coved skirting, apply Monarthane ‘V’

Data Sheet


Appearance Solid colour with white mottled fleck
Colours Available in wide range of colurs
Texture The finished profile of Monarthane can be altered by client request to a rougher texture, to counteract particularly slippy areas.


Compressive strength 58n/mm² Sup resistance (rapra 45 slider) Dry Wet 60. For vertical applications to form coved skirting, apply Monarcove

Curing @ 20°C

Foot traffic 10hrs
Vehicular Traffic 24hrs
Down Arrow Up Arrow twitter Facebook Google Plus Linkedin instagram Left Leaves Right Leaves