Monarflow PU is a water-based polyurethane self-smoothing resin floor screed designed to provide excellent heavy duty usage with resistance to thermal shock, abrasion and chemical attack in aggressive industrial environments.
- High chemical resistance
- Resistant to hot water
- Self sealing
- Matt finish
- Food safe & non taint (Campden BRI approved)
- Extremely hard wearing
- Food manufacture & processing
- Brewing & beverage
- Conference centres
- Pharmaceutical & chemical plant processing
- Automotive & aviation production
- Heavy duty plant and traffic areas
Supplied in 16kg units
The following figures are obtained from laboratory tests and our experience with this product.
Dry > 50, low slip potential
7 years plus
Subject to industrial traffic
Terms and conditions will apply
To achieve the best performance from Monarflow PU the correct surface preparation is essential. Substrates must be clean, sound, dry and free of surface laitance with a minimum strength of 25N/mm². All surfaces must be prepared by vacuum blasting or mechanical abrasion.
Monarflow PU may be applied to substrates with a surface temperature in the range of 5-20°C and a relative humidity < 90% RH, with a minimum air temperature of 8°C and no condensation. Do not pre-warm this product as working times will be substantially reduced if materials are warm.
Surfaces should be primed with Monarprime at an average rate of 4 sq.m per kg. Monarprime DPM should be applied if the relative humidity of the concrete is greater than 75% RH at 4s.q.m per kg. allow to cure for 8-12 hours @ 20°C
When the primed surface is tack free Monarflow PU should be applied at the required rate as soon after mixing as possible. (Delay can result in variation in surface finish, colour and application problems)
FeRFA Category : 5/7