MONARCOAT 720 is specified for usage on floors and walls where a high quality durable, dust-free surface is required.
Typical areas of usage are in light manufacturing electronics and automotive workshops, warehouses and industrial units.
Method of Use
Surface Preparation – see requirements for preparation Data Sheet
All surfaces should be cured to 5% moisture content or less than 75% Relative Humidity. D.P.M’s should be installed and intact. Vacuum blasting or diamond grinding on all smooth or dense surfaces is preferred
Mix all components A and B together with a drill and paddle for a minimum of two minutes until homogeneous mix obtained.
Apply product from paint scuttle by medium pile polyester rollers (as standard, a longer pile may be required in rougher substrates). Utilise brushes for detail and edge work.
Product may be squeegee applied for thicker surface finish.