Epoxy Resin Flooring

Monarcoat 700

Monarcoat 700 is an epoxy resin coating used where a fast-cure is required in an industrial environment. It provides an attractive, dust-free chemical and abrasion resistant floor coating. Monarcoat 700 is based on a blend of epoxy resins, mineral fillers and solvents.

Monarcoat 700 is particularly well suited to forming lines / zebra crossings and chevrons, to mark hazardous areas, denote pedestrian walkways and line marking.

Monarcoat 700 can be loaded with high pigment levels to produce white and safety yellow colours without opacity problems.

Due to its fast-cure properties areas and lines can be marked out and coated, and be re-coated within a few hours.

Monarcoat 700 is a two pack product. Add the contents of the hardener into the base tin and stir mechanically for 2-3 minutes.

Apply by medium pile roller (or radiator roller for lines) in two separate applications.

Physical Properties
Pack sizes:
3 and 6kg coverage

150g/m²/coat, depending on porosity and profile of substrate

Data Sheet


Appearance Coloured, liquid resin
Colours Light grey, mid grey, flint grey, mid green, light green, mid blue
Safety Colours White, safety yellow, safety red


Seamless Continuous gloss finish
Versatile Non-slip option available
Tough Durable, hardwearing, low maintenance flooring
Fast-Cure Enables multi-coat applications in one day
Pot-Life Long pot life for extended use time


Coverage 6-7m²/kg/coat
No. of Coats 2 coat floor treatment. Further coats may be required on light colours
Pot-Life 45 minutes @ 20°C
Re-Coat 2 Hours @ 20°C
Light Traffic 24 Hours @ 20°C
Down Arrow Up Arrow twitter Facebook Google Plus Linkedin instagram Left Leaves Right Leaves